problems with micro alarm

Home / the12volt's Install Bay / Car Security and Convenience / problems with micro alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

fausto

Member - Posts: 2

Joined: June 02, 2003

Location: Moldova

Posted: June 02, 2003 at 9:54 AM / IP Logged

I have a micro alarm (model road rage rral400) installed in a mercury grand marquis 95, when te alarms get armed the led flashes alternative with great intensity and low intensity, but not in the correct way (on and off), when this ocurr the doors can open without activating the alarm. Somebody knows the solution to this problem, it might be poor ground? because the problem appears and disappears. Thanks in advance

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: June 02, 2003 at 4:54 PM / IP Logged

i would check the ground first and see if that will fix the prob......if not may be inside the unit....

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

problems with micro alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.