the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 tacoma remote starter


Post ReplyPost New Topic
< Prev Topic Next Topic >
huj2000 
Member - Posts: 3
Member spacespace
Joined: January 26, 2018
Posted: January 26, 2018 at 10:13 AM / IP Logged Link to Post Post Reply Quote huj2000
hey im new to the forum and i just started doing a remote starter on my 2010 toyota tacoma manual trans with the standard chipped key with the dot on the key, i have everything wired up and im trying to learn my key but its not working, i have the dball2 bypass and FT-7200S-CONT remote starter, i bought the dball2 on ebay and the seller flashed it for me before sending it out i have double checked all my connections to the dball2 and i know they are correct, i plug in the harnesses into it with the main power harness being the last one i plug in and im getting the solid red led but when i put in the key and it is supposed to flash red led im still just getting the solid red led i would appreciate any advice in advance thank you
bogucki 
Copper - Posts: 91
Copper spacespace
Joined: July 11, 2016
Location: Alberta, Canada
Posted: January 26, 2018 at 11:29 AM / IP Logged Link to Post Post Reply Quote bogucki
hey,
did you connect the key sense wire from the dballs blue port to the car ?
also check to make sure your tx and rx wires are not reversed
boguckialex
huj2000 
Member - Posts: 3
Member spacespace
Joined: January 26, 2018
Posted: January 26, 2018 at 11:52 AM / IP Logged Link to Post Post Reply Quote huj2000
yes those are the wires that i double checked to make sure and yes the keysense and the tx and rx wires are correct, i got an email back from the ebay seller telling me that from what i explained to him the dball was not getting an ignition on the black connector im going to double check that when i get back from work tonight
huj2000 
Member - Posts: 3
Member spacespace
Joined: January 26, 2018
Posted: January 26, 2018 at 11:48 PM / IP Logged Link to Post Post Reply Quote huj2000
i checked the ignition and im all good there i have ignition power on that wire

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer