2008 Toyota Avalon With Push To Start

Home / the12volt's Install Bay / Car Security and Convenience / 2008 Toyota Avalon With Push To Start

Welcome Guest :)

Members

< Prev Topic Next Topic >

zzhummer

Member - Posts: 4

Joined: October 17, 2023

Location: New York, United States

Posted: October 30, 2023 at 10:42 AM / IP Logged

Installation on a 2008 Toyota Avalon with push to start. Do I use the ignition wires from the push to start switch and use a relay to make make them (+). Wiring diagram shows ignition 1 and 2 as (-)

kreg357

Platinum - Posts: 7,802

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 02, 2023 at 12:54 PM / IP Logged

Need more info. What Remote Start make and model and bypass module are you using?

Soldering is fun!

zzhummer

Member - Posts: 4

Joined: October 17, 2023

Location: New York, United States

Posted: November 23, 2023 at 6:49 AM / IP Logged

Avital 4115 and PKALL. I used a relay to change the remote start + output to a - output and it work fine.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.