85 300zx remote door locks

I know at lease the passage side has a door lock unlock solenoid not sure of the drivers side.

does anyone know the wire location and color code to pulse the doors open and closed.

thanks in advance

SailingBob

i should also add you wiill need two relays to make it work .

On both the relays pin 87  and pin 86 will get 12 volts positive ,pin 87A  will get ground on both relays, and pin 85 will go to your lock wire, and on the other relay pin 85 will go to your  unlock wire from the alarm or keyless entry module.Now pin 30 on both relays will go to your actuator. You will need to make sure your alarm is putting out a negative  pulse to triger these relays. good luck .

thank you mobiletoys2002 I lost this web site but just found it again and will wire up as you suggested.  will the passenger side door actuator fit on the drivers side (from a parted out car) or do I just us after market door lock solenoids (which I have)   Bob