Members
Search
Register
Login
Posted: December 16, 2025 at 3:04 PM / IP Logged
hi there im trying to get my doors to unlock while remote started. I tapped into my actuator and wired up a 2 relay reversal tapping into the actuator feed. however while i can hear the motor in the door move its still too slow or something and doesnt give enough force to pull the cables that unlock and lock.
i have 10gauge coming from battery directly into cabin (fused at 50a at battery) then from there fused at 20a into here https://www.the12volt.com/relays/relaydiagram49.html and finally into pins 6/7 with 18 gauge(matches oem wiring) of the doors connector.
but still no unlock or lock
but still no unlock or lock
If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Tuesday, December 16, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Tuesday, December 16, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
