Black Widow power locks output

Home / the12volt's Install Bay / Car Security and Convenience / Black Widow power locks output (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pablom

Member - Posts: 2

Joined: January 30, 2003

Location: Canada

Posted: June 13, 2003 at 9:10 AM / IP Logged

Hello,

Im trying to connect an external relay module for locking and unlocking the car doors using aftermarket actuators, the problem is that I don't have the manual for the alarm, but I can see that all Black Widows have a 3 pin output for the door, what is the configuration of these pins?, I understand that 2 are use to lock and unlock what about the third?....Any help will be appreciated.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: June 13, 2003 at 10:53 AM / IP Logged

The 3rd will be your polarity selector. I'm not familiar with BW alarm systems but most other systems that require you to fuse a 12 volt for add on actuators and use this diagram for the actuators.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

pablom

Member - Posts: 2

Joined: January 30, 2003

Location: Canada

Posted: June 16, 2003 at 1:57 PM / IP Logged

Jeff, thanks for your help.

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: June 16, 2003 at 4:15 PM / IP Logged

What is the model number of the unit? And you're saying it's three wires on there, not five, right?

If it has five wires, that would mean it has onboard relays that can control the actuators.

If it has a three-pin plug, the two outer ones are for lock and unlock. The middle pin is a low-powered constant positive.....it can be used to supply power to terminal 85 of the relays but will NOT be strong enough to supply the high-current demand of terminal 30 of the relays.

So you should be able to safely assume that the two outer ones are the negative lock outputs. Connect each of them to terminal 85 on your relays, and if the locks work backwards, just swap them around.

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: June 17, 2003 at 9:53 AM / IP Logged

I'm employed by a Black Widow dealer. You need the relay pack that comes with the Black Widow alarms. I have many. Let me know if you need me to send you one.

Do it right the first time

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Black Widow power locks output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.