door lock problems

Home / the12volt's Install Bay / Car Security and Convenience / door lock problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

coolmanron

Member - Posts: 3

Joined: October 05, 2003

Location: United States

Posted: October 14, 2003 at 2:56 PM / IP Logged

Alright, I have 2 wires coming from my alarm that constantly show 12v+, these are my lock and unlock. Now I am trying to plug them into the factory alarm harness but heres the problem. The lock/unlock wires require only a pulse of 12v+ to lock not constant. I've tried almost everything with relays but I'm still stuck. PLEASE HELP, I've been stuck for almost 2 days.

derek123

Copper - Posts: 163

Joined: October 09, 2003

Location: Canada

Posted: October 14, 2003 at 3:46 PM / IP Logged

I think you are reading the pull up.

when you press a button, lock for example, the lock wire goes ground ?

if so, add relays to make the pulses positve.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door lock problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.