530t Troubles

ok so i installed 2 530t in my 2002 Nissan Sentra, everything works fine except the passenger window, i did the install so one 530t controls the drivers side window and the other controls the right side. my Right rear window works fine but the front doesn work at all, my side switch doesn't work (no clicking from the 530t) and the passenger switch pops the fuse. so i disconnected the wires for the RF window and put it back to normal and now my switch still doesn't work and the passenger switch does. could i have fried the switch? oh yeah i had the wires backwards at first and i corrected it any help will do alarm: viper 790xv

You probably fried the switch. Take apart the bad switch and look for a burnt solder trace. It can probably be easily repaired. I did the same thing on my car and just soldered a little jumper wire around the burnt trace.