the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 Honda Civic VP


Post ReplyPost New Topic
< Prev Topic Next Topic >
hazmanrog 
Member - Posts: 4
Member spacespace
Joined: November 18, 2002
Location: California, United States
Posted: November 28, 2003 at 10:47 AM / IP Logged  
Any solutions for adding door lock actuators on new cable system.
10nesne1 
Silver - Posts: 284
Silver spacespace
Joined: June 19, 2002
Location: British Columbia, Canada
Posted: November 28, 2003 at 12:04 PM / IP Logged  
Break off the top surrounding plastic holds the lock and unlock puller. Drill a 1/8 hole on the square metal and install the door lock actuator straight on the bottom off the door. Bent the metal comes with the actuator and insert it to the hole that you drove.
Good luck. 2002 up Civic all comes with cable. I installed a couple dozens already and works great. No one had came back and complain.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer