99 jimmy Omega remote start

Home / the12volt's Install Bay / Car Security and Convenience / 99 jimmy Omega remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

billbear

Member - Posts: 8

Joined: December 10, 2003

Location: United States

Posted: December 10, 2003 at 7:11 PM / IP Logged

installer elimated my delay lamps on enter and exit with omega rs-7k2 remote start i want use factory key fobs but to use as remote start with 2 pulse on lock was to long delay for omega touch ground fast was fine . i still want factory remotes is there a way cut a wire say for (rear x2 ) button to use that as remote start input ? if so where relay and wire color ?

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: December 11, 2003 at 11:01 AM / IP Logged

call 1-800-554-4053 and see if the guys can help you out...

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 jimmy Omega remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.