I need help with wiring on 94 Mustang

Home / the12volt's Install Bay / Car Security and Convenience / I need help with wiring on 94 Mustang (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

fobra

Member - Posts: 6

Joined: December 23, 2003

Location: United States

Posted: December 24, 2003 at 12:42 PM / IP Logged

I installed a compustar WSS-AS alarm and i have all the wiring hooked up to the best of my knowledge and everything works great BUT the car wont remote start. Is there a 2nd ignition i need to hook up? I follow the instructions to put it in reservation mode and it still says im not in reservation mode....any help or assistance would be greatly appreciated since this thing is beating me up :-( Thanks!

fobra

Member - Posts: 6

Joined: December 23, 2003

Location: United States

Posted: December 24, 2003 at 12:44 PM / IP Logged

BTW i bypass the clutch safety switch as well...

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: December 25, 2003 at 2:17 AM / IP Logged

there is a second accy that is BLACK/ green. the tachomoter wire is grey/orange or dark green loacted at EDIS module on passenger side of motor below air intake. It has a 12-pin plug on it

fobra

Member - Posts: 6

Joined: December 23, 2003

Location: United States

Posted: December 25, 2003 at 7:39 AM / IP Logged

Actually thanks......i found it that since i did a custom install....i hooked up the input wire for the door triggers to the handles rather then the doors so fi anyone pulls the handle it will go off rather then if you open th door.....so i have to lift the handle and close the door to activate reservation mode, thanks!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

I need help with wiring on 94 Mustang

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.