'01 Explorer alarm bypass

Home / the12volt's Install Bay / Car Security and Convenience / '01 Explorer alarm bypass (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: August 07, 2002 at 11:29 AM / IP Logged

I'm trying to put a remote start in this truck, and have a couple questions about bypassing the factory anti-theft.

1. Do I need to send a disarm signal to the factory alarm and bypass the transponder, or is it just one or the other necessary?

2. Does the signal have to be positive or negative, and pulsed or constant?

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

joyride2k

Member - Posts: 40

Joined: August 02, 2002

Location: United States

Posted: August 07, 2002 at 4:54 PM / IP Logged

Yes you need to bypass the factory alarm and you definately need to bypass the transponder.

First find out if you have a factory alarm. Just look under the hood and see if you have a plunger on the left of the engine bay. I've looked through all of my notes and I'm not even sure if they had factory alarms? But if you have the plunger you'll have it, it's usually GREEN/ violet in the driver's kick. And you have to ground it to disarm. And if you have PATS, and I'm sure you do, you'll have to bypass it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'01 Explorer alarm bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.