2000 dodge neon remote starter

Home / the12volt's Install Bay / Car Security and Convenience / 2000 dodge neon remote starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

peter884

Member - Posts: 8

Joined: February 06, 2004

Location: Canada

Posted: February 06, 2004 at 10:39 AM / IP Logged

i have just installed a pro-start starter in mt neon everything works fine except when it starts my heater fan wont come on untill i insert the key and turn it on. if anyone has had this problem or knows what i did wrong please let me know thanks

peter

Trav3D1

Copper - Posts: 146

Joined: April 06, 2003

Location: United States

Posted: February 06, 2004 at 11:37 AM / IP Logged

Hello Willy,

It sounds like you did not hook up the "Accessory" wire from your alarm to the vehicle. You should have a BLACK/ White accessory wire in your ignition harness. Double check your connection to this wire.

Good Luck

Trav

peter884

Member - Posts: 8

Joined: February 06, 2004

Location: Canada

Posted: February 06, 2004 at 1:22 PM / IP Logged

thanks trav your right it was a bad connection so i soldered the wires instead and it works great .

peter

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 dodge neon remote starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.