2000 Malibu, Autopage rf-1055ke

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Malibu, Autopage rf-1055ke (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sgray

Member - Posts: 3

Joined: February 19, 2004

Location: United States

Posted: February 19, 2004 at 3:59 PM / IP Logged

I got a question about installing a autopage keyless entry system (RF-1055KE) in a 2000 cheverolet malibu, on the main wiring harness of the keyless unit the wiring harness has 9 wires im going to make a list of how it goes

Green-Parking light output(10A)

Red(+)- 12V Main Power (15A)

Blue-Horn Output (-)

Black - Main Ground

BLACK/ White- Starter interrupt (500 mA Gound Output)

Yellow- 2nd Channel (200 mA Gound OUtput
Blue/White- 2 Step Unlock (-) output

Orange - Domelight Output

White- Switched Ignition Input

I know were the other ones goes but the Yellow 2nd Channel i do not know what is it for and also the Blue/White wire what is it for are what should it hook to could someone post me some info trying to install this weekend.

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: February 19, 2004 at 4:08 PM / IP Logged

yellow would only be hooked up if you were using this Aux output, like to a relay to pop the trunk, etc.

Blue/white is only hooked up if the vehicle has priority door locks and you want to incorporate this feature

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

sgray

Member - Posts: 3

Joined: February 19, 2004

Location: United States

Posted: February 22, 2004 at 3:25 PM / IP Logged

Im instlaling Autopage rf-1055ke and i got power and my parking lights are working but nothing else i installing in a 2000 chev malibu and when i connect the wires up i get nothing from the locks i think i go a 3 wire positive trigger door lock system the wires do not go to any relay and it has a 12V source running to the switch he is how the wiring harness goes on my system

Light Blue-Door Unlock(-) Door Lock+

Red -12 Volt Output + Supplied By alarm
Light Green- Door Lock(-) Door Unlock(+)

I need to know what is the Red 12 volt output for supplied by alarm what does it hook to because im getting nothing from my door locks

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: February 22, 2004 at 3:37 PM / IP Logged

you don't need the red wire,just hook up the lt/blue wire to the lock(lt/blue)wire and the lt/grn to the unlock (white)wire.That red wire is for the coil side of relays.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Malibu, Autopage rf-1055ke

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.