omega aux2 and aux3 pulsed or toggled?

Home / the12volt's Install Bay / Car Security and Convenience / omega aux2 and aux3 pulsed or toggled? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

markcars

Silver - Posts: 662

Joined: December 11, 2002

Location: New York, United States

Posted: March 18, 2004 at 4:51 AM / IP Logged

anyone knows if the second and third aux outputs on the Omega max is a pulsed output or a latched/toggled output? If it is pulsed, I would like to connect one of them to my horn.

Thanks.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 18, 2004 at 8:53 AM / IP Logged

its similar to the 2nd channel output (gray wire), except it is not capable of disarming the system. you will not have any audible or visual confirmation..

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

markcars

Silver - Posts: 662

Joined: December 11, 2002

Location: New York, United States

Posted: March 18, 2004 at 11:38 AM / IP Logged

when I press aux2 (or 3), will it give an output for just 1 pulse or is the output continuous until I press the aux2 again?(toggle). thanks.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

omega aux2 and aux3 pulsed or toggled?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.