help with crimestopper cs-2001rs alarm

Home / the12volt's Install Bay / Car Security and Convenience / help with crimestopper cs-2001rs alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bigal3du

Member - Posts: 8

Joined: August 17, 2002

Location: United States

Posted: August 31, 2002 at 4:40 PM / IP Logged

Hey Guys,

I'm having problems loacting the tach sensor wire in my car, it says its a PURPLE / white wire in teh ign module, what is the best way to get to teh ignition module, I'm not sure how to start taking apart the underbody of my steering wheel. Also, is there another source I can use as a tach sensor that would be easier?

I'm working with a 1993 Chevy Lumina Euro 4D sedan.

Thanks!

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 31, 2002 at 9:40 PM / IP Logged

The tach wire is in the looming that runs parallel in front of the engine block. Wire is PURPLE / WHITE and you will need to pull back the looming to get at it.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

bigal3du

Member - Posts: 8

Joined: August 17, 2002

Location: United States

Posted: August 31, 2002 at 11:43 PM / IP Logged

must the wire by PURPLE / white, i see a purple wire, but not a purple white one, maybe I'm not looking the right place. I see two sets of wires and a purple on in the smaller set. Its purple with a white stripe?

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: September 01, 2002 at 6:24 AM / IP Logged

Find the ignition module in the engine bay then follow that wire loom to a spot that you can tap into and check that PURPLE / white wire with a dmm for ac voltrage only while running you should get between 1-6 volts ac this is alternating current not dc so set the meter correct. This wire will also fluctuate with engine speed but this is not as meaningfull as getting an ac wire that reads between 1 volt and 6 volts ac.

Search for other posts by mobiletoys2002

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

help with crimestopper cs-2001rs alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.