the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Latching Relay


Post ReplyPost New Topic
< Prev Topic Next Topic >
bradleonard 
Copper - Posts: 94
Copper spacespace
Joined: August 12, 2002
Location: United States
Posted: May 30, 2004 at 6:05 PM / IP Logged  

How do I setup a latching switch that would be activated by a momentary switch that would close a relay until it lost power?

werd
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: May 30, 2004 at 8:46 PM / IP Logged  
what are you looking to do???
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
bradleonard 
Copper - Posts: 94
Copper spacespace
Joined: August 12, 2002
Location: United States
Posted: May 31, 2004 at 2:23 AM / IP Logged  

I am wanting to build a clutch start cancel switch similar to the ones that come standard on the 89-95 Toyota 4WD pickups. I want to be able to put the key in and turn it to the accessory position, push a momentary button which latches a relay that closes the clutch lockout circuit and stays latched until I turn off the ignition or until the power is lost at the accessory position during cranking.

werd
mottyk 
Member - Posts: 6
Member spacespace
Joined: May 30, 2004
Location: United States
Posted: May 31, 2004 at 6:00 PM / IP Logged  

Check out this link  https://www.the12volt.com/relays/page5.asp it has a few types of latching relay applications.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer