the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 Intrepid window with alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
snakoiler 
Member - Posts: 8
Member spacespace
Joined: June 25, 2004
Location: United States
Posted: June 25, 2004 at 10:10 AM / IP Logged  
I installed an Avistart 4300 alarm and everything works well except I am trying to get the windows to go up and down with the extra channels (4 and 5 are free to use for anything). I have the correct wires and measure ground at the door switch and 12v when operating the switch but when i have the relay put 12v from the remote on any of these wires, the fuse blows, a ground at the switch does nothing.Do these run through resistors or do I need something additional? Thanks
snakoiler
cosmoworks 
Copper - Posts: 144
Copper spacespace
Joined: June 02, 2004
Location: United States
Posted: June 25, 2004 at 11:07 AM / IP Logged  
You need to brake the circuit while applying the +12V. Both wires probably rest at ground while the window is not operating, so applying +12V to a wire, will just short it out.
To make the window go up, find the wire that reads +12 when going up at the motor. Cut the wire and wire the switch/car side of the wire to pin 87a (bosch type relay). Wire the motor side of the wire to pin 30, and wire +12V to pin 87 and 85. Finally connect your (-) channel output to pin 86.
To roll them down do the same thing with the wire that reads +12V when going down and use the other (-) channel output on pin 86.
snakoiler 
Member - Posts: 8
Member spacespace
Joined: June 25, 2004
Location: United States
Posted: June 25, 2004 at 11:38 AM / IP Logged  
Thanks, this sounds like it will not allow the window to work with the door switch since I am braking the circuit, should I tap into the motor wire to keep the switch operational is that correct? How also can I operate all 4 windows by using the opne door motor? Will I have to hand wire all 4 door motors throughout the car? Thanks for the info
snakoiler
snakoiler 
Member - Posts: 8
Member spacespace
Joined: June 25, 2004
Location: United States
Posted: June 25, 2004 at 11:39 AM / IP Logged  
I meant one door motor...not opne door motor
snakoiler
cosmoworks 
Copper - Posts: 144
Copper spacespace
Joined: June 02, 2004
Location: United States
Posted: June 25, 2004 at 12:27 PM / IP Logged  
The switch will still work, because when the relay is not energized, 87a and 30 will be connected. When the relay is energized, the 87a and 30 connection will be broken and pin 30 (the motor) will be connected to +12V.
You are correct in your assumption. You will need to make all the connections at the motor in each door, so for 4 doors, you gotta wire them up 4 times. To make 4 windows go up and down, your gonna need 8 relays... sounds like it might be a cleaner install if you used (2) DEI 530T's.
snakoiler 
Member - Posts: 8
Member spacespace
Joined: June 25, 2004
Location: United States
Posted: June 25, 2004 at 12:44 PM / IP Logged  
Cool, thanks a lot, i will use the 2 dei 530Ts
snakoiler

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer