98 Windstar how to Re-Enable Alarm & Kill

Home / the12volt's Install Bay / Car Security and Convenience / 98 Windstar how to Re-Enable Alarm & Kill (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jstncase

Member - Posts: 1

Joined: July 13, 2004

Location: United States

Posted: July 13, 2004 at 12:57 AM / IP Logged

I took my van in for service, they didn't know about or how to use my keyless entry for the killswitch. So they disabled the engine killswitch as well as the alarm all together. I want to know how to get these back working.

98 Ford Windstar 3.8L everything is factory Keyless Entry as well as kill switch tied into keyless entry. Even worse the driverside door does not work with the keyless entry anymore. it looks like it tries to unlock but simply can't. When alarm is pressed car is supposed to lock all doors, enable killswitch on engine and arm alarm, chirping 2x. Car will only chirp 1x, Unlocking all doors except driver door and supposed to disable engine killswitch.

What wires must I reconnect, or what fuse must I replace? (Hoping for the simplest). Also in what general area do I have to look for whatever needs to be replaced. Fuse box under steering or under hood?

Thanks for all the help. Extrememly appreciated.

Dano360

Member - Posts: 2

Joined: July 13, 2004

Location: Canada

Posted: July 13, 2004 at 7:57 PM / IP Logged

Hey, Try looking under the dash on the drivers side, u might have to take off ur kick panel( metal and plastic peices under your steering wheel coloume) Then try and look for a black box with wires coming out of it. make sure that the harnesses are all plugged snuggly into the box. hope this helps

Carz are mah fav

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 Windstar how to Re-Enable Alarm & Kill

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.