Programing Code Alarm CA-110

Home / the12volt's Install Bay / Car Security and Convenience / Programing Code Alarm CA-110 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bchuff

Member - Posts: 3

Joined: July 23, 2004

Location: United States

Posted: July 24, 2004 at 11:58 PM / IP Logged

Frustraiting time with this alarm and installer.

1. Dodge Ram 1500 Dome ligh delay, alrm chirps 3 times, due to dome light. INstaller tells me to take out dome light. Right.

2. Chrips are not so loud, but horn is, so I want to turn off horn. Finally find manual online to program. So I give it a go.

Install manual say turn ignition on and press valet button 6 times. Nope, after 3 times it goes to remote programing.

How do I get into programing mode on the Code Alarm CA-110. Thanks!

bchuff

Member - Posts: 3

Joined: July 23, 2004

Location: United States

Posted: July 25, 2004 at 11:57 AM / IP Logged

Okay, after reading the rest of the manuals for other Code Alarm models, I figured out the misprint.

http://www.codl.com/manuals/installation/

For the rest of you, the CA-110 and most likely others,

1. Turn Ignition On. (I had drivers door open, not sure if it matters)

2. Turn Ignition Off. (The part that was missing)

3. Press and release the valet switch 6 times, the alarm will chirp once, you are in Programing mode.

bchuff

Member - Posts: 3

Joined: July 23, 2004

Location: United States

Posted: July 25, 2004 at 7:48 PM / IP Logged

Well, the saga continues.

The system acts like it is going through the programing steps, but none of the changes are taking affect.

Is there a step missing to "Save" the changes, I'm currently just waiting for the time-out.

Does anyone reading these posts install Code Alarm on a regular basis and willing to lend a hand?

Thx.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Programing Code Alarm CA-110

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.