the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

polar start ps 2700 install manual


Post ReplyPost New Topic
< Prev Topic Next Topic >
matt_willie 
Member - Posts: 3
Member spacespace
Joined: September 02, 2004
Posted: September 02, 2004 at 12:12 AM / IP Logged  

i'm looking for a install manual for ps-2700. i've presently have it hooked up in a 04 astro cargo van.It turns over and starts then shuts off and continues to crank over.after that when i start it with key the service engine light stays on.any help would be great. 

kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: September 04, 2004 at 2:49 PM / IP Logged  
are you powering all the required ign and acc circuits?.... sounds to me like you are leaving a second ign unpowered
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
matt_willie 
Member - Posts: 3
Member spacespace
Joined: September 02, 2004
Posted: September 08, 2004 at 6:50 PM / IP Logged  
i found a manual and located the correct tach wire. i have set the tach but the van continues to not won't to stay running.do you have to bypass the passlock or not
trogguy 
Member - Posts: 1
Member spacespace
Joined: September 13, 2004
Location: Canada
Posted: September 13, 2004 at 8:45 PM / IP Logged  
Where did you locate a manual for the PS-2700?  I was given one from a co-worker and need to get it installed.  Any help would be appreciated....
CanadianJimmy 
Member - Posts: 1
Member spacespace
Joined: October 06, 2004
Location: Canada
Posted: October 13, 2004 at 7:21 AM / IP Logged  

Im also looking for the manual for the ps-2700, has anyone found one online ? or does anyone have one that can tell me what wires go where ? It was installed on a 97 jimmy i purchased and all the wires aren't hooked up so Im not sure if it completely installed correctly or not.

One main thing is can someone tell me the correct connection for the little white plug ? the pins it connect to is larger then it. I take it the tappered side of the plug goes against the part of the board that holds it down but where does it go ? top or bottom

Thanks for any help


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer