Ignition wire on 2002 ram 1500

Home / the12volt's Install Bay / Car Security and Convenience / Ignition wire on 2002 ram 1500 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hollywood

Member - Posts: 7

Joined: September 22, 2002

Location: United States

Posted: September 23, 2002 at 7:00 PM / IP Logged

I have completed my install on starter and the service 4wd light comes on after remote start. I know it is an ignition wire but not sure which one I missed. The biggest question I have is that the posts on this site claim the red wire is the 2nd ignition wire. I get constant power in that wire. Not sure which wire I missed. I have the green hooked to accessory, RED / wht to 2nd ign and small blue to 1st ign.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 24, 2002 at 12:32 AM / IP Logged

First, there may be 3 RED / white wires at the key. One of these wires is an Ignition 2, and must be connected in order to prevent the light from coming on . The correct RED / white wire will show 0 volts with the key in the "off" position. All the other red / whites will show some amount of voltage with the key off.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

hollywood

Member - Posts: 7

Joined: September 22, 2002

Location: United States

Posted: September 24, 2002 at 11:41 PM / IP Logged

I have finally solved the ignition wire problem. I already had the RED / wht wire hooked up correctly but the orange wire must be hooked up to accessory to turn the dash lights out. I am responding mainly to help anybody else out. The primary ign should be on small blue wire, 2nd ignition on small RED / wht, 2 accessory wire are required through relay to green wire and orange wire. Thanks for the help Jeff.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 25, 2002 at 7:53 AM / IP Logged

No problemo... good to hear that you figured out the problem and thanks for posting your results as well.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ignition wire on 2002 ram 1500

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.