the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

power door lock and siren problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
Lee_Thao 
Member - Posts: 16
Member spacespace
Joined: November 03, 2004
Location: United States
Posted: November 06, 2004 at 8:18 PM / IP Logged  
i just install a clifford matrix 3.5 into a integra, i'm pretty sure everything is right, but would not trigger the power door lock and unlock. there's no door trigger wire from the clifford alarm, there's a doorlock and door open wire which are connected already. And also my siren won't sound at all, am i suppose to cut a wire off of the siren to make a specific sound ? anyone have a clue ?
Lee
snguyen 
Silver - Posts: 281
Silver spacespace
Joined: October 09, 2003
Location: United States
Posted: November 06, 2004 at 9:44 PM / IP Logged  

What year is your integra?

Lee_Thao 
Member - Posts: 16
Member spacespace
Joined: November 03, 2004
Location: United States
Posted: November 07, 2004 at 5:23 AM / IP Logged  

my integra is a 1996 GSR. i just want to hook up the basic stuff for now, but can't seem to have power door lock working or the siren working at all. there's no sound from the siren. Am i suppose to hook up the siren negative wire to ground also or just hook up the siren wire from the module to the siren negative and have positive from siren to battery. And also does the ignition wire from the alarm need to be connected at all for basic alarm installation or is it not needed.

Lee
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 07, 2004 at 8:50 AM / IP Logged  
Can you please post what wires you used for the door locks and also the locations that you used. As far as the ignition wire, you will need this to be hooked up. This tells the unit wether or not the car is running. The siren (-) wire needs to be grounded and the siren output wire from the alarm needs to be connected to the (+) side of the siren .
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Lee_Thao 
Member - Posts: 16
Member spacespace
Joined: November 03, 2004
Location: United States
Posted: November 07, 2004 at 2:40 PM / IP Logged  

 

  • RED (12V CONSTANT)             -    BATTERY (+)
  • BLACK (GROUND)                     -   BATTERY (-)
  • ORANGE ground when armed -   BATTERY (-)
  • WHITE (+/- PARKING LIGHT)   -   RED / GREEN WIRE OF CAR
  • GREEN ( - DOOR TRIGGER)   -   GREEN/ RED WIRE OF CAR
  • VIOLET ( + DOOR TRIGGER)   -   BLACK/ RED WIRE OF CAR
  • BLACK/ WHITE (DOME LIGHT) -   NEG DOME LIGHT WIRE OF CAR
  • BROWN (+ TO SIREN)               -   CONNECT TO NEGATIVE OF SIREN
  • BLUE ( TRUNK TRIGGER)        -   GREEN WIRE OF CAR (KICK PANEL)
  • WHITE/ BLUE (ACTIVATION)      -   I DID NOT HOOK THIS WIRE UP
  • RED / WHITE (CHNL 2 VALIDITY)- DON'T KNOW SO DIDN'T HOOK UP

THATS ALL THE WIRE THAT I USE EXCEPT FOR THE WIRES THAT JUST HOOK UP TO THE SHOCK SENSOR AND ANTENNA. THEY JUST ALL HOOK UP TO THE UNIT. I DIDN'T KNOW IF I SHOULD USE THE OTHER WIRE THAT SEEMS TO BE FOR START UP TO HOOK UP TO IGNITION. THOSE ARE THE WIRES THAT SEEMS TO GO TO IGNITION. WHEN I PRESS THE LOCK/UNLOCK BUTTON ON THE REMOTE, THE PARKING LIGHTS WORK BUT NO SIREN AND POWER DOOR LOCK WORK.

Lee
Lee_Thao 
Member - Posts: 16
Member spacespace
Joined: November 03, 2004
Location: United States
Posted: November 07, 2004 at 2:42 PM / IP Logged  

ARE THOSE THE ONLY WIRES THAT NEED TO BE HOOKED UP FOR BASIC ALARM INSTALLATION OR AM I MISSING OTHER WIRES THAT SHOULD BE CONNECTED FOR THE ALARM TO WORK?

Lee
Lee_Thao 
Member - Posts: 16
Member spacespace
Joined: November 03, 2004
Location: United States
Posted: November 07, 2004 at 2:48 PM / IP Logged  

DO I USE THE IGNITION WIRE FROM THE START UP WIRES FROM THE ALARM UNIT TO HOOK UP TO THE IGNITION OF THE CAR, OR WHICH WIRE DO I USE FOR THAT ?

Lee
cgalvin29 
Member - Posts: 35
Member spacespace
Joined: July 16, 2002
Posted: November 07, 2004 at 9:49 PM / IP Logged  
Your alarm has two wires for door trigger pos and neg. your door pin is only going to need one wire. You need to figure out if it neg or pos and hook that wire up acordingly the descriptions you gave are not for keyless entry
Lee_Thao 
Member - Posts: 16
Member spacespace
Joined: November 03, 2004
Location: United States
Posted: November 07, 2004 at 10:09 PM / IP Logged  

yes there are two wires for door trigger. i hooked up the pos door trigger wire to to the door unlock wire of the car, and the neg door trigger wire to the lock wire of the car, but that leaves the main door trigger wire of the car. how do i go about with that ? which wires do i connect from the alarm to that car wire. also when the doors are open when armed it didn't sound off the alarm, so i don't know. if anyone could help ?

Lee
Lee_Thao 
Member - Posts: 16
Member spacespace
Joined: November 03, 2004
Location: United States
Posted: November 07, 2004 at 11:53 PM / IP Logged  

which wires do i use for power door lock and unlock, i can't seem to figure it out. there's a relay that plugs into the alarm module, which has 5 wires.

  • violet/black   -   lock/unlock
  • GREEN/ black  -   lock output
  • WHITE/ black   -   lock normally closed
  • blue/black     -   unlock output
  • BROWN / black  -   unlock normally closed

i'm really confused on which wires connect where and if i don't need to use all these wires. by the way the violet/black wire have a fuse relay on it.

Lee
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer