command start car starter

Home / the12volt's Install Bay / Car Security and Convenience / command start car starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sendit2ross

Member - Posts: 1

Joined: November 18, 2004

Location: United States

Posted: November 18, 2004 at 10:52 AM / IP Logged

i have a command start car starter in my safari van. the problem is it no longer works and am not familiar with car starters. if you push the buttons on the remote it beeps so it still works i think. and when you open the hood it shuts the starter off because of the button under the hood. but it will not start the car or work the locks. anyone have any ideas, my wife is breathing down my neck to get it working

thanks

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 18, 2004 at 12:19 PM / IP Logged

Did you turn off the toggle switch by accident located underneath the driver's side dash ? This would cause a no start error to happen, but your door locks shoudl still be working. You might have to reporgram the remote control. What model number do you have ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: November 18, 2004 at 2:19 PM / IP Logged

Sounds like the 555c remote.... 2 button beeping.

Open hood, pule the hoodpin once, parklights come on, pule again to make them stay on. Press Button number one. That's it as far as programming the remote goes. Here's something else to try. With the hood up, hold down the pinswitch manually and then press the doorlock button (the one with 2 dots on it, or on the right if the keyring is down) If the parkights flash once (lock) or twice (unlock), (before you reprogram the remote, that is) then one of the reasons it isn't starting is the switch is off under the dash.

All of the CSI units I have ever seen will do diddly if the hoodpin is grounded or up.... locks won't even do anything.

Let us know.

Gus

Wherever I go, that is where I end up......

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

command start car starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.