2000 dodge caravan door locks

Home / the12volt's Install Bay / Car Security and Convenience / 2000 dodge caravan door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jay's detailing

Member - Posts: 24

Joined: January 12, 2004

Posted: November 26, 2004 at 8:33 PM / IP Logged

Hello everyone, I need some help with the power locks on a 2000 dodge caravan. The sheet that I have calls for a 1500ohm resister to lock and a 250ohm resister to unlock. Now I got the lock to work with the 1500ohm resiter but I can not get the 250ohm resister to unlock. I need to know what I'am doing wrong. if I need two relays. I would need to know how to wire them with the resisters to make this work.. I'm useing a Prestige aps636 remote starter unit.

~~~~~~~~~~~~~~~~~~~~~~~~Angel~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Search for other posts by jay's detailing

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 26, 2004 at 9:56 PM / IP Logged

it would help to know what brand of alarm you are using................sounds like you have the wrong resistor on the unlock wire.....

Power Lock WHITE/ D GREEN BOTTOM OF JUNCTION BLOCK TWO #217

Power Unlock SINGLE WIRE SYSTEM CONNECTORS,ONE ON THE LEFT. ***

*** Single Wire Door Lock System, WHITE/ D GREEN Wire Requires Chassis Ground Thru A 1.5K Ohm Resistor To Lock And Chassis Ground Thru A 249 Ohm Resistor To Unlock.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

jay's detailing

Member - Posts: 24

Joined: January 12, 2004

Posted: November 26, 2004 at 10:11 PM / IP Logged

hey David, thank you for the info. as I said before the sheet that I have said a 1500 to lock and a 250 to unlock. I didn't think that because of ohm it would make a differance, but I guess I was wrong, who knew.. thanks again and I will try this in the morning and get back at you.. angel

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: November 26, 2004 at 10:22 PM / IP Logged

if you aren't using relays, use a 100ohm resistor for unlock.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 dodge caravan door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.