Need help with 2001 Frontier

I got this wiring diagram:Battery GREEN (+) IGNITION SWITCH HARNESS

Ignition 1 BLACK/ WHITE (+) IGNITION SWITCH HARNESS Ignition 2 RED / YELLOW (+) IGNITION SWITCH HARNESS Ignition 3 (+) Accessory 1 WHITE/ BLUE (+) IGNITION SWITCH HARNESS Accessory 2 (+) Starter 1 BLACK / YELLOW (+) IGNITION SWITCH HARNESS Starter 2 GREEN/ YELLOW (+) IGNITION SWITCH HARNESS Anti-Theft Type RF ACTIVATED SYS. Anti-Theft Descript TRANSPONDER Key Sense WHITE/ GREEN (+) IGNITION SWITCH HARNESS Neutral Safety YELLOW (-) RELAY BOX PASS INNER FENDER Tachometer PINK/BLUE (-) ELECTRONIC CONTROL MODULE (ECM) Speed Sense GREEN/ BLACK (AC) ABOVE BRAKE PEDAL Parking Lights BLUE/RED (+) BEHIND SWITCH AT WHT. CONN. Brake Lights BROWN / RED (+) BRAKE SWITCH Reverse Lights YELLOW/RED (+) DRIVERS KICK Horn LIGHT GREEN/ RED (-) AT STEERING COLUMN Doorlocks/Windows Power Unlock BROWN (-) LF.KICK PANEL AT FACTORY SECURITY MODULE PowerLock GREEN/ RED (-) LF.KICK PANEL AT FACTORY SECURITY MODULE Driver Mtr Unlock GREEN / WHITE (+) FACTORY SECURITY MOD. LF.KICK PANEL Driver Mtr Lock BLUE (+) FACTORY SECURITY MOD. LF.KICK PANEL Pas Mtr Unlock PPL FACTORY SECURITY MOD. LF.KICK PANEL LF Window Up LF-BLUE (+) RF Window Up RF-BLUE / YELLOWDRIVER DOOR SWITCH (+) LR Window Up LF-BLUE/RED (+) RR Window Up RF-BLUE/WHITEDRIVER DOOR SWITCH (+) Convenience Headlights-Lo RED LF. RED / BLK RT. WHT 8 PIN CONN Wipers-Lo WHITE/ RED (-) AT SWITCH Modules Module 1 RIGHT OF GAS PEDAL Audio/Mobile Video Battery PINK (+) RADIO HARNESS Accesory BLUE (+) RADIO HARNESS Ground GRAY (-) RADIO HARNESS Illumination RED / BLUE (+) RADIO HARNESS Dimmer RED / YELLOW (+) RADIO HARNESS LF Speaker (+) PINK LF Speaker (-) BLUE RF Speaker (+) WHITE RF Speaker (-) BLACK The question I now have is how to wire up the scond starter, I was told I need one realy for a second starer kill and one for crank during remote start, Can I wire them up like this?  Btw: its a Viper 790xv.

2nd starters kill relay:

86- 12v85- orange ground when armed output, same one that's hooked to starter kill 187a- key side of 2nd starter wire30- starter side of 2nd starter wire87- not used2nd starter crank relay86- 12v85- purple ribbon wire, splice in up by the relay pack this is the - 200ma starter relay turn on 87- 12v30- output to the 2nd starter wire, use a heavier gauge wire like all the others I think there 12g87a- not used

no1 knows?  com on guys

First, you don't need to use a starter kill on starter#2. Second you have the relay correcn for Starter Crank relay. Also you probably would have had an answer to your question earlier if you didn't copy your vehicle's wiring diagram to the post, too much reading without knowing the question.Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

K thanx. I thought it would be helpful.  I appreciate your help.