91 Eagle Talon, viper v791vx

Home / the12volt's Install Bay / Car Security and Convenience / 91 Eagle Talon, viper v791vx (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Pharmecis

Member - Posts: 6

Joined: January 10, 2005

Location: United States

Posted: January 10, 2005 at 7:26 PM / IP Logged

On a side note, I'm trying to install the same alarm on a 91 Eagle Talon. I've got most of it wired up but still can't get the remote start to work. Do I need to use the 2nd pink/white wire as well? In order for me to troubleshoot, what is the minimum wires needed to be hooked up for the remote start to operate?

Thanks,

Greg

Pharmecis

Member - Posts: 6

Joined: January 10, 2005

Location: United States

Posted: January 11, 2005 at 11:31 AM / IP Logged

I have pretty much everything working except for the following issues on a 91 Eagle Talon:

If I start the car w/ the remote start, I cannot turn it off via the ignition.

The heater / ac will not cut on

The door still thinks it's open and I used the GREEN/ red wire as per documentation found here.

Any help would be appreciated.

Greg

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

91 Eagle Talon, viper v791vx

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.