Diode Isolate 98 Blazer

Home / the12volt's Install Bay / Car Security and Convenience / Diode Isolate 98 Blazer (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Pioneer21

Member - Posts: 3

Joined: October 21, 2002

Posted: October 25, 2002 at 3:52 PM / IP Logged

I am installing a Viper 550 ESP in a 98 Blazer and I need help on the door triggers. Do I need to diode isolate the 3 door triggers or can I just tap into all 3 with the negative door trigger? And is there a diagram for doing a diode isolate if they need to be.

Thanks, freezing in fargo

go2pac

Copper - Posts: 179

Joined: May 04, 2002

Location: California, United States

Posted: October 25, 2002 at 4:16 PM / IP Logged

You should be able to get the one wire for the two doors and hatch. You will have to program the alarm for delayed courtesy light.

Karl

Pacific Accessory Corporation

Mobile Audio Interfacing Equipment

Connecting You to Your Music Since 1976

Pioneer21

Member - Posts: 3

Joined: October 21, 2002

Posted: October 25, 2002 at 5:33 PM / IP Logged

So I use the Dome light wire at the BCM is this correct? That will trigger all 4 doors and the hatch?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Diode Isolate 98 Blazer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.