93 mazda 626 door locks

Home / the12volt's Install Bay / Car Security and Convenience / 93 mazda 626 door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

zoomzoomzoom

Member - Posts: 4

Joined: April 01, 2005

Location: United States

Posted: April 01, 2005 at 4:30 PM / IP Logged

hi i need help, im trying to install actuator in my door. not sure what kind of locks i have. there is no button, but if i push the drivers side door lock up and down, all locks go up and down. the alarm i am using is autopage rf-310. i have two 30 amp relays. i tryed hooking up like the 3 wire diagram, did not work ? im lost , any advice?????

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: April 01, 2005 at 5:42 PM / IP Logged

if you usin an actuator you have to do is 5wires door locks

85 (-) lock from brain 85 (-) unlock from brain

86 and 87 12v fused 20amp 86 and 87 12v fused 20amp

87a ground 87a ground

30 to the green wire in the actuator 30 to the blue wire in the actuator

good luck 93 mazda 626 door locks -- posted image.

how own your mind, control your life.

MECP certified. always use a DMM

zoomzoomzoom

Member - Posts: 4

Joined: April 01, 2005

Location: United States

Posted: April 01, 2005 at 6:57 PM / IP Logged

the actuator has yellow and white wires , audiovox

zoomzoomzoom

Member - Posts: 4

Joined: April 01, 2005

Location: United States

Posted: April 01, 2005 at 7:31 PM / IP Logged

i can only get 1 , lock or unlock, if i take the ground and plug it to both relays, it will only unlock, when i try to lock the ground starts sparking. visa versa. ????????????

zoomzoomzoom

Member - Posts: 4

Joined: April 01, 2005

Location: United States

Posted: April 03, 2005 at 4:17 AM / IP Logged

dare_ds69,

you say :

85 (-) lock from brain 85 (-) unlock from brain

86 and 87 12v fused 20amp 86 and 87 12v fused 20amp

this sites diagram says:

85 (-) lock from brain 86 (-) unlock from brain

86 and 87 12v fused 20amp 85 and 87 12v fused 20amp

anyways, thanks dare_ds69, your way worked.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

93 mazda 626 door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.