Makeing your own relay harness

Home / the12volt's Install Bay / Car Security and Convenience / Makeing your own relay harness (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: April 05, 2005 at 5:23 PM / IP Logged

were can u buy the terminals for doing this, they need to be able to have 2 16-14 gage or up to about 10 or 12 gage wires in them. i have ones that except 14-16 gage wire.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 05, 2005 at 7:24 PM / IP Logged

Uh,,,, You shouldn't be using a relay if you need 10 gauge wire. Also, ever hear of female terminals?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: April 05, 2005 at 7:39 PM / IP Logged

Taht what i was refering to is the female 1/4". maybe saying 10 agw was not right. i can buy the pre wire harness, they have 2 14 or 16 gage wires. going into 1 terminal. so you dont have to make 2 seperat leads. i need to find the 1/4" femal teramils that except 2 wires.

OhioMike1101

Silver - Posts: 343

Joined: August 22, 2004

Location: United States

Posted: April 19, 2005 at 9:21 PM / IP Logged

i always just use sockets. Seem to be quicker to use for me.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Makeing your own relay harness

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.