CPX2300 alarm, 02 Dakota

Home / the12volt's Install Bay / Car Security and Convenience / CPX2300 alarm, 02 Dakota (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sparker18

Member - Posts: 2

Joined: April 10, 2005

Location: United States

Posted: April 10, 2005 at 10:44 AM / IP Logged

I finally found an alarm, Car-Pro CPX2300 by Autopage, for my 02 Dakota (no pwr windows or locks) and figured I save the $80 and install it myself. Well it's starting to kick my butt. I'm obviously getting power to the unit and out to the siren because the panic mode works, but as for the arm/disarm function it's a no go. I found a website(www.designtech-intl.com) that gave me the color codes for the wires but I'm at a standstill. Can anybody help me out?

All the lights flash when the panic goes off, so I got those wired right.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: April 10, 2005 at 12:31 PM / IP Logged

does the led blink as you arm or disarm it. is the led on at all times, if so it is in valet mode.

sparker18

Member - Posts: 2

Joined: April 10, 2005

Location: United States

Posted: April 10, 2005 at 6:38 PM / IP Logged

no the led doesn't flash at all

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

CPX2300 alarm, 02 Dakota

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.