Toad C4

Home / the12volt's Install Bay / Car Security and Convenience / Toad C4 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dbennett9

Member - Posts: 3

Joined: December 13, 2004

Location: United Kingdom

Posted: May 01, 2005 at 3:22 PM / IP Logged

Hi, i dont know if anyone has experience of these alarms, i know that they arn't common in USA.

I have realised that the Toad C4 installed on my Honda Prelude 1990, is really badly done, no hood switch, no door pin tie in, wires loose in the engine bay. All the connections are easily seen, and loads of wires lead no where, no solder ANYWHERE.

Also for some reason there are two window closure modules when it works with one.

I really need the wiring diagram for this alarm, or a contact for someone who can get them for me.

Thanks in advance

Dan Bennett

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: May 06, 2005 at 5:47 AM / IP Logged

hi you are right i dont think these are known over in the usa i have only fitted the a1606 cat 1 toads so i dont think that the c4 should be a problem if you look on ebay you can get a disc that has all the toad diagrams on it for about £5.00 if that helps good luck.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Toad C4

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.