the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Dedicated 12V Line


Post ReplyPost New Topic
< Prev Topic Next Topic >
mtxblau 
Member - Posts: 20
Member spacespace
Joined: November 10, 2004
Posted: June 13, 2005 at 12:39 AM / IP Logged  

I've read more than a few threads and I'm still not sure, so I figured to ask the experts directly.

I am considering running a dedicated 8/10ga power wire and dedicated 8/10ga ground line for the electronic equipment, which includes the car radio, car alarm, cd changer, equalizer, neon and some LEDs.

I figure I can use the original power line for the radio as a trigger for a relay, and have the 10ga go into 85 on the relay, and output on 30.

The question is whether this is a viable option? Should I use heavier gauge? Will there be any effect for running the car alarm wires (it has two wires running to the battery) with the radio wires? I've been pretty uncomfortable with the two car alarm wires running directly to the battery...

Thanks in advance.

Powermyster 
Silver - Posts: 962
Silver spacespace
Joined: April 06, 2005
Location: Ireland
Posted: June 13, 2005 at 3:36 AM / IP Logged  
Run the alarm off the Ignition harness.
 
I don't get whats wrong with the original radio wires or if there is any.
 
I have run dedicated lines before( for remote start system when it wanted 2 20A supplies). If your gonna be putting alot of stuff in the car it might not be a bad idea. i usually find the earth in the car. on the chasis!
 
 
85,86 on a relay control the switching
 
30 should be to power source
 
87 should be the device you want switched on
 
 
dare_ds69 
Silver - Posts: 419
Silver spacespace
Joined: January 25, 2005
Location: New Jersey, United States
Posted: June 13, 2005 at 5:54 AM / IP Logged  
all the pends what are you going to do and what kind of car are you doing U use heavy wire. for Amps YOU have to use 4ga or 8ga, for alarm you just use the ignition harnes and if it is for RS maybe you need to go to battery
how own your mind, control your life.
MECP certified. always use a DMM
mtxblau 
Member - Posts: 20
Member spacespace
Joined: November 10, 2004
Posted: June 13, 2005 at 11:34 AM / IP Logged  
Maybe I'm looking at this wrong, and I think you might be setting me straight.
The gauge of the car alarm wires to the 12v appears to be the same gauge as the ignition wire. I thought it might be a bad idea (generally) to have that sort of power draw from the ignition wire... though, it sounds like that really isn't an issue?
And, right now I have two neon tubes (12"), 4 LEDs, and the aforementioned hardware running from the one radio wire (because it's already relayed of course, and can't leave the neon on while the car is off). There may be two more neon tubes for the back seats, and two-four more LEDs, but not much - I wasn't sure if the stock radio wire could handle all of that, so I thought it best to run a dedicated wire.
Sorry if the second half of this question doesn't fall into car security - I wasn't sure where to post the initial question.
Again, thanks all so far for your replies and thanks in advance for future replies...
mtxblau 
Member - Posts: 20
Member spacespace
Joined: November 10, 2004
Posted: June 14, 2005 at 11:06 PM / IP Logged  

Sorry to bump, but for clarification...

It's a Crimestopper CS-2016FM, with remote start. It does require (as far as I can tell) 2 20ga lines.

So, the question remains - I probably could/should run a dedicated line from which I can run the remote start & from a relay the electronic equipment.

More neon is possible, as is an LCD in the horizon.

Thanks again......


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer