the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 Freestar 556s problems


Post ReplyPost New Topic
< Prev Topic Next Topic >
skratchy98 
Member - Posts: 4
Member spacespace
Joined: July 06, 2005
Posted: July 06, 2005 at 4:12 PM / IP Logged  
Hey everyone, I'm new to the forum and I woud greatly appreciate any help I can find. I'm installing a DEI 265b remote start/keyless entry system on a 2004 Freestar. So far, everything works as long as the key is in the ignition. The problem is when I try to program the 556s, it won't work more than one time and then starts flashing the security light. As far as I can tell, everything is hooked up correctly.
To program it, all I have tried is the thing with turning the key to run, waiting on the light to go out, doing the same with a 2nd key, removing the key, and then remote starting it. This works fine the first time, and then it is as if the module doesn't remember the correct code.
Any ideas??? (HELP)
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: July 06, 2005 at 5:05 PM / IP Logged  
I use the OMEGA IB-PKF-3  No Key Required
But:
Be sure you have constant 12 volts to RED wire on 556s......
Also don't wait to long between keys & RS when programming
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
skratchy98 
Member - Posts: 4
Member spacespace
Joined: July 06, 2005
Posted: July 06, 2005 at 5:26 PM / IP Logged  
Thanks for the info, I'll have to double check the connections (again). The only other thing I can think of is that maybe the two keys are interfering with one another during programming. They aren't really that close to one another, maybe 3 or 4 feet, but I can't think of anything else. Has anyone else had this problem???
skratchy98 
Member - Posts: 4
Member spacespace
Joined: July 06, 2005
Posted: July 06, 2005 at 5:28 PM / IP Logged  
I just thought of another thing. The guy that I am installing this for lost one of his original keys and had to go to the dealer to get another one. I'm not sure how they programmed the new key, but would this cause any problems?
gus1 
Gold - Posts: 1,013
Gold spacespace
Joined: October 15, 2003
Location: Canada
Posted: July 06, 2005 at 8:34 PM / IP Logged  
Do all of the keys he has start the vehicle properly? If so.... no problemo. Check your pellet position. You will have to experiment greatly with placement.
Gus
Wherever I go, that is where I end up......
skratchy98 
Member - Posts: 4
Member spacespace
Joined: July 06, 2005
Posted: July 08, 2005 at 5:04 PM / IP Logged  
Thanks for the help Gus, I moved the antenna ring about a quarter of an inch closer to the key and everything works fine!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer