94 z28 door locks

I installed an alarm on my 94 camaro and everything works I just can't get the locks to work with the alarm. If someone could tell me what wires to use or have a picture that would be great. Thanks for the help.

• Non-keyless versions: Use light blue for lock and dark blue for unlock.  Both wires are located in either door harness. The passenger switch is the master switch.
• Keyless versions: Use RED / black for lock and ORANGE / black for unlock. Both wires are located in the passengers kick panel at the keyless entry module. Do NOT use the orange power wire at the keyless module or door lock switch to power your door lock relays. The passenger switch is the master switch.
• This is also a type C system: https://www.the12volt.com/doorlocks/page3.asp#5w

Hey jeff

Thanks for the reply but I have a question for you.

I'm not sure if my car is a keyless entry car and I was wondering if it is could I still wire it like a non-keyless car? I tried to wire it to the blue wires like you said but still nothing.

Any ideas? Please let me know

Thanks

Ok I did take off my passenger side kick panel and I do have a keyless entry box there. I found the wires and hooked it up but still nothing. Do you think that the keyless entry box could be messed up? I didn't get any remotes with the car when I bought it. Anyway thanks for your help and if you have any other advice then I would like to hear it.

Thanks