the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

kepad controls 2 alarm systems


Post ReplyPost New Topic
< Prev Topic Next Topic >
joe_1 
Silver - Posts: 286
Silver spacespace
Joined: November 12, 2004
Location: United Kingdom
Posted: August 13, 2005 at 7:39 AM / IP Logged  
hi, i have a problem with 2 alarm systems being controlled with 1 keypad, i was programing my mates alarm yesterday until it started doing its own thing then i realised it was my mate messing with his keypad and it was messing up the programing so i came out of the programing mode and my mates keypad arms and disarms my other mates alarm pretty funny but i dont know if i should try and turn the little adjuster in the keypad to try and change the  frequency or something  the alarm systems are both the same make and model and are both thatcham 1 systems so you would have thought they would have set them up as safe as possible so that there could be no way another keypad could open the car so if anyone could help it would be much apriciated as i dont know where to go from here. thanks in advance 
dare_ds69 
Silver - Posts: 419
Silver spacespace
Joined: January 25, 2005
Location: New Jersey, United States
Posted: August 15, 2005 at 6:39 AM / IP Logged  
you have to erase the kepad and program again that way u will erase both and only one will be program again.
how own your mind, control your life.
MECP certified. always use a DMM
joe_1 
Silver - Posts: 286
Silver spacespace
Joined: November 12, 2004
Location: United Kingdom
Posted: August 15, 2005 at 2:00 PM / IP Logged  
how did it end up this way in the first place?, the keypads are for two different alarm systems but they operate each other but i dont even want to program these alarms they are a pain in the ass, might just have to keep it as it is how about changing the setting inside the keypad itself do you recon this will do anything.
joe_1 
Silver - Posts: 286
Silver spacespace
Joined: November 12, 2004
Location: United Kingdom
Posted: August 15, 2005 at 4:36 PM / IP Logged  
ok thanks for the help guys i think i will just leave both of the systems alone, the funny thing about this is they live in the next street to each other, lucky it aint next door otherwise this would be a very big problem

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer