Hazards won't flash on arm and disarm

I've connected up the wires to the indicator switch for the left and right hand indicators and still nothing.

The alarm gets its power from a red wire that i connected to an interior light for the current sense so from what i've read on here it seems the hazards aren't getting enough power to flash?

Would it be ok to stick the current sense wire on the positive battery terminal instead and have the lights flash rather than a current sense alarm?

Thanks

I'm fitting a Microscan AN211 alarm to a Peugeot 306

In that case what would be a good wire to stick it to in order to get enough power to make the hazards flash?

Cheers

btw your site is great

I have a 1999 Turbo Diesel so i would assume these are the details?

http://www.alarmwiring.net/Peugeot/peugeot306d1997.htm 

Needed to know the locking wires too

Cheers

Thanks, i'll try this although on the diagram on the site above it says the parking light wires are grey and pink for my model.

Here is a link to the instructions telling me to wire to the indicators and an interior light, cowboys. :)

http://www.microscanalarms.co.uk/pages/an200series2002.pdf

Thanks