Positive Trigger.

hey guys its me again, sorry for my dumb question, but, positive trigger means taht i need 12V for example, to close the windows, open the doors.......... ?

well, my english is not good, i dont know how say what im trying :D

i have an product that close/open the windows, when the alarm is ARM.... so i connected everything but dont work. So i was trying to figure whats wrong.

One of the wires say Central Locking Negative Trigger, i know that its the wire that detect that my doors are closed, so after that the windows module will start working.

after i ARM the alarm i ear the Windows Module Addon Relay working, but the windows dont close.

I have in the manual i read "The Connection Way WIth Negative Raising Up WIndow" its what im talking abt, it means taht the windows will closed with an GND SIgnal, right?

i read my car manual and it say taht need to send GND to the switch to close the window.. if i just send an GND Signal to the Swith it work, but with the module no :(

btw, i think that i will drop that shhh. :D

sure dude, i already posted it a few days ago.

thanks for help me dude.

well, is strange, i dont know why dont work....

i cut the wire that when the swicth is up send the gnd to the motor.

well, im using the diagram number 3

ill add the manual of my car window power

the model is an Twin Spark

so you can have all the materias to decide if its ok or no :D

www.compreyvenda.cl/images/powerwindows.pdf

you can see my car dewscription in page 5 Fusebox A or C

Thanks guys

ok, more info...

its the test that i did....

as u can see i just cut the wire from the switch and connected it to the product.

btw, if i get any GND and put it into yellow wire of the car, the windows motor start closing the window.