Window Roll-up Module trigger wires

Hi folks-

New to your site here, looks very informative. I am hoping someone can give me a quick answer to a likely simple problem I have. I have a CL200 window roll-up module (no name on the box..China). Pretty sure it is a Bulldog unit, I purchased it at the same time as my alarm. To the point, the diagram shows inclusion of the starter kill relay, in some fashion. In a nutshell, there are two triggers, brain and something else. Need help with the something else. Is this wire for the module to verify if the alarm is armed and therefore should not allow operation of the windows (like someone reaching in a fly window or something to roll down the window)? The diagram makes it appear that the starter relay trigger is wired through(and triggered) by the window module.  Any tips? Is this wire just grounded when the alarm is armed? Or a secondary trigger to roll up with arming instead of the button on the remote? Thanx!

Rob

The other wire is diode protected and goes to the starter kill relay IF you are using the starter kill LEAD from the alarm to trigger the windows (?). It's really just there so you don't have to diode seperate the circuit yourself.

Hope this is what you meant.