791xv isn't reporting to my pager

Home / the12volt's Install Bay / Car Security and Convenience / 791xv isn't reporting to my pager (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

propain

Member - Posts: 4

Joined: September 22, 2005

Posted: September 22, 2005 at 12:38 PM / IP Logged

Basically, everything works right with the alarm, and the two-way pager sends signals just fine. When I press a button I get the rx icon first, then the tx icon and text. However, the unlocked icon never changes to a locked icon, and I never get any updates on the pager about what's going on with the truck. If I remote start it, no icons show on the pager.

So my question is, is there a jumper on the brain that I didn't set right, or is there something else simple that I'm overlooking here?

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: September 22, 2005 at 12:58 PM / IP Logged

try unplugging the antenna for about 5 minutes

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

propain

Member - Posts: 4

Joined: September 22, 2005

Posted: September 22, 2005 at 1:04 PM / IP Logged

I'll give it a shot tomorrow night, thanks for the recommendation. :)

I'm assuming this will "reset" the antenna?

propain

Member - Posts: 4

Joined: September 22, 2005

Posted: September 23, 2005 at 7:16 AM / IP Logged

Bumping this for the morning crew, just in case anybody has additional insight.

propain

Member - Posts: 4

Joined: September 22, 2005

Posted: September 24, 2005 at 1:28 PM / IP Logged

Okay, unplugging the antenna for 10-15 minutes didn't do the trick. I also double checked all the connections / pins to make sure none were bent, but everything was fine.

I'll try another pager remote when I get some time and see if that does the trick, unless somebody has a better idea.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

791xv isn't reporting to my pager

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.