immobiliser

Home / the12volt's Install Bay / Car Security and Convenience / immobiliser (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ozgeorge

Member - Posts: 5

Joined: October 01, 2005

Location: Australia

Posted: October 03, 2005 at 1:41 AM / IP Logged

sorry i will repost this question in a more general way:

has anyone any experience with a system similar to this (maybe other australians?):

it is basically an upgradeable immobiliser with multiple input possibilites. it has all black wiring coming out of the brain box which is apparently a legal requirement where i live. the unit is remote controlled.

anyway, i have successfully wired in most of the wires (eg to central locking, indicators, door switches etc etc) but i am a bit confused by the actual immobilisation circuits. The unit has two independent 30amp immobilisation circuits that i presume are just switches connected to relays inside the box. Only problem is there seem to be too many wires!

each circuit has 2 wires coming out of the box but these mysteriously split into two each. giving a total of 4 wires per circuit. if it was 2 wires per circuit i was going to wire one into the starter behind the ignition (key) and the other into the dizzy low tension circuit. but im confused by the four wires... why do these wires split into two? are they decoys?

any help would be gratefully received! this looks like a great online resource.

thanks!

george

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: October 03, 2005 at 4:20 AM / IP Logged

Who makes the unit??

"ole blake"

ozgeorge

Member - Posts: 5

Joined: October 01, 2005

Location: Australia

Posted: October 03, 2005 at 5:52 AM / IP Logged

dynamco: its a s35i. i think that the same system exists rebadged under other names such as dynatron d355, night vision nv5000, d355 and p355.

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: October 03, 2005 at 6:29 AM / IP Logged

I took a look at ur model on the website,and you have 2 immobilisation circuits which could be starter,and fuel pump.I dunno what ur manual says.I noticed you have 2 smaller wire bundles with female spade connectors on the end,and one big bundle.Look at your manual,and see how many wires go to each circuit that it's going to immobillize

"ole blake"

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

immobiliser

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.