Mazda 3 remote starter and alarm comb

Hello,

i'm just wondering if there's any special procedures or cautions that i need to take before installing an alarm/starter on to this vehicle it's automatic... I know that it is a single wire door lock system.... now how do i connect the relay(s)? what is the numbers for each terminal? and what do you guys know about the 1000 ohm resistor for the foor lock system?

What brand and model alarm is it??"ole blake"

Not sure what year??

Some Installers will Direct wire from the R / S Alarm with the 1K Resistor

OR2 SPDT RELAYS:

LOCK:

PIN 87 = GroundPIN 30 = 1K ohm Resistor to Vehicles Lt GREEN / Red wirePIN 85 = Negative Lock Output from AS6520PIN 86 = Constant 12 volt ( + )

UNLOCK:

PIN 87 = GroundPIN 30 = to Vehicles Lt GREEN / Red wirePIN 85 = Negative UNLock Output from AS6520PIN 86 = Constant 12 volt ( + )

http://www.directechs.com/directwire/wire_body.asp?action=select&yr=5616&product=Remote%20Start

& http://www.directechs.com/directwire/wire_body.asp?action=select&yr=5616&product=Security

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.