'04 Titan alarm

Home / the12volt's Install Bay / Car Security and Convenience / '04 Titan alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

04whitetitan

Member - Posts: 5

Joined: November 06, 2005

Location: United States

Posted: November 06, 2005 at 11:35 AM / IP Logged

I just purchased one of those all in one kits for my base model 04'Titan. I have installed the powerwindow & locks, without a hitch. The instructions on the Alarm are very vague. Can anyone tell me what wire is the dome light wire, and also y I would need to have the door + & - triggers wired. The diagram only shows the - triggers? I have the pannels off and, am looking at the bcm but cannot locate proper wires w/ my multimeter.

Any help would be greatly appreciated!!!

Thanks for the help

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: November 06, 2005 at 12:55 PM / IP Logged

the door triggers are negative.....one trigger wire for each door

driver front: lt blue pin 7 bcm, 15 pin connecter

rear: RED / yellow pin 8 15 pin connecter

pass front: RED / blue pin 9, 40 pin conecter

rear: grey pin 8 40 pin connecter

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 06, 2005 at 1:35 PM / IP Logged

do what KarTuneMan said, but the 4 wires he listed they have to be doiode isolated from eachother

04whitetitan

Member - Posts: 5

Joined: November 06, 2005

Location: United States

Posted: November 06, 2005 at 1:55 PM / IP Logged

I only have the kingcab so only 2 doors, but my alarm module has a + door trigger input??? completely confused??

The alarm comes on and off. parking lights do not flash. can open the door/no alarm. shake shock sensor around/no alarm. Turn key in ign/alarm. And finally have starter disable relay. 85 -armd opt/ 87 ign swtch crnkng/ 30 strtr mtr/ 86 fused 12v input?? What am i doing wrong????

Thanks for the help

04whitetitan

Member - Posts: 5

Joined: November 06, 2005

Location: United States

Posted: November 06, 2005 at 3:14 PM / IP Logged

bump

Thanks for the help

04whitetitan

Member - Posts: 5

Joined: November 06, 2005

Location: United States

Posted: November 06, 2005 at 7:44 PM / IP Logged

any help would be appreciated!!

Thanks for the help

04whitetitan

Member - Posts: 5

Joined: November 06, 2005

Location: United States

Posted: November 07, 2005 at 5:57 AM / IP Logged

any takers???

Thanks for the help

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'04 Titan alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.