Unknown Central Locking

Home / the12volt's Install Bay / Car Security and Convenience / Unknown Central Locking (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

isoking

Member - Posts: 8

Joined: November 13, 2005

Location: Australia

Posted: November 13, 2005 at 5:48 AM / IP Logged

Now im not sure how to hook up my alarm to this unit, ive jsut installed the central locking unit, all works fine. the alarm connection is from 2 wires from the main unit, However how the wires work is if you touch them together they lock, if you touch them again they unlock. What type of connection is this?

now which one of my alarm connection would i use. thanks in advance

Note # 1:

This system works of differents ways. For example:

1.- vehicle equipped with Central Lock with a motor inside the driver's door.

1.1.- Connection diagram for positive triggered central lock:

ORANGE / Black, N/C.

WHITE/ Black, unlock signal.

Yellow/Black, + 12 V.

Orange, N/C.

White, lock signal.

Yellow, + 12 V.

1.2.- Connection diagram for negative triggered central lock:

ORANGE / Black, N/C.

WHITE/ Black, unlock signal.

Yellow/Black, ground chassis.

Orange, N/C.

White, lock signal.

Yellow, ground chassis.

2.- Vehicle equipped with Central Lock with only a lock/unlock switch instead of a motor inside the driver's door.

(Conection diagram for reverse polarity triggered central lock).

ORANGE / Black, Ground chassis.

WHITE/ Black, Unlock signal.

Yellow/Black, + 12 V.

Orange, Ground chassis.

White, Lock signal.

Yellow, + 12 V.

3.- Vehicle equipped with Central Lock with not only a lock/unlock switch but also a motor inside the driver's door.

(Conection diagram for positive loop central lock).

ORANGE / Black, lock/unlock switch.

WHITE/ Black, Unlock signal.

Yellow/Black, + 12 V.

Orange, lock/unlock switch.

White, Lock signal.

Yellow, + 12 V.

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: November 13, 2005 at 9:27 AM / IP Logged

Are you saying the ONLY way the Door Locks work is if you TOUCH both the LOCK & UNLOCK together???

Have you tried Touching LOCK or UNLOCK to GROUND??

I'll bet it is typical NEGATIVE Input......which you would use your wiring of:

1.2.- Connection diagram for negative triggered central lock:

ORANGE / Black, N/C.

WHITE/ Black, unlock signal.

Yellow/Black, ground chassis.

Orange, N/C.

White, lock signal.

Yellow, ground chassis.

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Unknown Central Locking

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.