the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1995 Grand Prix Alarm Door Lock Problems


Post ReplyPost New Topic
< Prev Topic Next Topic >
flyguy91318 
Member - Posts: 4
Member spacespace
Joined: October 28, 2005
Location: United States
Posted: November 13, 2005 at 11:54 AM / IP Logged  
So an attempt was made to put an aftermarket alarm in the vehicle so that remote keyless entry would be possible and now there's nothing but problems.
1. First the car wouldn't unlock when put into Park, it would just lock when put into neutral or drive.
2. Now its decieded that the automatic door locks button will only work when the car door is closed. Sometimes it doesn't work at all, and others it sounds like its straning to work.
I've pulled the alarm hoping that might solve some of this but it didn't. I've also checked every fuse I could find and they all seem to be in working order. If anyone has any suggestions, please help.
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: November 13, 2005 at 12:21 PM / IP Logged  
I would go over every wire you hooked into, to make sure the FACTORY wires are intact.  
The Doorlock Relays are high up in the Driver Kick Panel....should be a Black unit with Orange, Black, Lt.Blue, & White wires....You could have burnt it (not unusual )
Also the FACTORY RKE is in the Trunk on Pass. side shelf
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
flyguy91318 
Member - Posts: 4
Member spacespace
Joined: October 28, 2005
Location: United States
Posted: November 13, 2005 at 12:58 PM / IP Logged  
My relays weren't high up in the kick-panel but very close to the ground. What I don't get, is that if the factory relay is burnt out, why does the car still lock when put into park and unlock/lock when the door is closed. I have a hard time believing that any of the factory wires are broken, I used clips to splice into them, and if they were broken, again why does it lock/unlock when the door is open? Thanks.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, August 20, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer