Posted: November 14, 2005 at 1:20 AM / IP Logged
Posted: November 14, 2005 at 8:47 AM / IP Logged
Posted: November 14, 2005 at 9:07 AM / IP Logged
Posted: November 14, 2005 at 9:59 AM / IP Logged
Posted: November 14, 2005 at 2:22 PM / IP Logged
Posted: November 14, 2005 at 5:01 PM / IP Logged
Posted: November 14, 2005 at 5:15 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version

| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com
Friday, November 14, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Friday, November 14, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.





Don't know if you did this, but if you connect the battery after having it disconnected, it'll show a high draw for a short period as things initialize and caps charge up, etc.
That's why you want to connect your meter between the terminal and post while the cable's still connected, and then carefully disconnect the terminal while maintaining contact with your meter probes. That way you're checking the true standby draw rather than a temporary peak reading.
If the problem's intermittent, then it'll be hard to find. Maybe it's the wireless link you have hooked up, since that'll come on at certain times, and that PC must draw a fair amount of current- How often does it link up while the car's off (if it does)?