Glass sensor mic location

Home / the12volt's Install Bay / Car Security and Convenience / Glass sensor mic location (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: February 14, 2006 at 5:31 PM / IP Logged

Where is the best place to mount the glass sensor mic?

"ole blake"

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 14, 2006 at 6:56 PM / IP Logged

Either in the door or if that's not accessible, then in the driver's kick panel is fine.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: February 14, 2006 at 7:22 PM / IP Logged

For some reason i was told to try and mount it in the middle of the vehicle for the best coverage..Is this true??

"ole blake"

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: February 15, 2006 at 9:44 AM / IP Logged

Anyone??

"ole blake"

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: February 15, 2006 at 12:41 PM / IP Logged

mrcllusb it must be a comprehensive system your installing

the above locations are good.. shouldn't need to go to the middle

Why oh Why didn't i take the blue pill

Darren Power

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: February 15, 2006 at 6:02 PM / IP Logged

I;m installing a clifford arrow 3 with intellistart,duplex shock sensor and glass break sensor..

"ole blake"

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Glass sensor mic location

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.