viper 719 prep

Home / the12volt's Install Bay / Car Security and Convenience / viper 719 prep (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

reefguy

Member - Posts: 36

Joined: March 03, 2006

Location: United States

Posted: March 04, 2006 at 12:12 AM / IP Logged

I am getting ready to install a 791xv in my wife's 96 lexus es300, it has a stock alarm, remote is together with the key, stock alarm when arm/disarming it locks/unlocks the power doors, it has secuity led in the right side dash, the hood and trunk not protected. I would like to keep the stock alarm as is. I did call a local car audio shop to see if the viper can be used together, and find out if it needs any relays, etc.. the owner told it needs nothing else except the 791 and to just not to use the stock alarm. so i wanted to ask you guys if i missed anything, i will be buying these items to use:

1. dei battery backup 2. couple piezo's sirens. should i get these following items 1. dei 530t window module

2. 506t glass break sensor.

any diodes or resistor needs to add the extra accessories? thanks,

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: March 04, 2006 at 12:24 AM / IP Logged

If you are using 3 - 4 sirens you should be putting a 30 amp relay inline on the siren wire to boost the total amp output on it as the brain is really only ment to run 1 siren as is. No resistors or diodes nessasary for the install on this vehicle. Its actually pretty basic. The factory alarm will work fine with the new system provided it is wired in properly. The alarm will arm on lock and disarm on unlock so thats easy. Then there is also a RED / blue wire in the drivers kick panel, you wanna hook up your disarm wire to that so when you remote start it will disarm the factory alarm so it doesnt go off on you. Hook up the rearm wire to the lock wire so it will pulse the lock wire after shut down and rearm the factory alarm. That should be everything you need to know. I guess if you wanna cover the trunk, there is no factory trunk pin to tap into so you will have to install your own which isnt included in the unit so you'd have to buy one of those but thats about it.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 719 prep

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.