Dual Zone Proximity for Intelliguard 7000

I was wondering how to wire up a clifford dual-zone proximity sensor IV to a clifford intelliguard 7000 alarm system. I biggest issue is the pre-warn chirp. I can't keep seem to figure out how to wire up the pre-warn chirp for the outer zone of the proximity sensor to the alarm.

as far as i know this is a multiplex sensor.. you should buy a dual zone sensor that is not multiplexWhy oh Why didn't i take the blue pill

Darren Power

The Sensor has to trigger wires. One is for full alarm and the other for pre-warn. On my alarm I have an armed input for full alarm, so I have that hooked up for the inner zone. My only problem is, how do I hook up the outer zone of the proximity sensor into the alarm so it will do a pre-warn when someone looks in the windows. I want the alarm airen to beep when the outer zone is triggered.

not sure the set up of the 7000 can you not tap into the shock.. or is the shock on the 7000 dual zone Why oh Why didn't i take the blue pill

Darren Power

The shock sensor on the 7000 is a multiplexed dual zone. On the 7000 I can remotely adjust the shock sensor as well.