the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Clifford 3.5, evo9


Post ReplyPost New Topic
< Prev Topic Next Topic >
leetless 
Member - Posts: 8
Member spacespace
Joined: September 15, 2006
Posted: October 21, 2006 at 12:46 AM / IP Logged  

i am just wondering is there anything important contains in the owner manual ( the one teachs you how to program and stuff)  like a code or anyhting

caz i dont have mine, but i mean its alright, i am not installing turbo timer or anything, but i do use rs from time to time

everythign seems working fine, except i cant start my car with my key,, i can only start it with my remote..  thats about it

everything seems working fine,

so ya is there anyhitng important in that owner manual.. is there a online version anywhere??

thanks

bhawkins 
Member - Posts: 31
Member spacespace
Joined: March 15, 2003
Location: United States
Posted: October 21, 2006 at 12:56 AM / IP Logged  
Install Guide:
http://www.directeddealers.com/manuals/ig/clifford/N919564_07-05.pdf
Owners Manual:
http://www.directeddealers.com/manuals/og/clifford/G919564_07-05.pdf
As for starting the car with the key your relay pack could have a stuck starter kill antigrind relay tap it a few times and see if that fixes it. If it doesnt you will prob have to replace it or remove the starter kill antigrind part. You should take it back to where you had it installed and have them look at it.
leetless 
Member - Posts: 8
Member spacespace
Joined: September 15, 2006
Posted: October 21, 2006 at 1:05 AM / IP Logged  

it was DIY all the way

i wanted to learn how to install alarm, and i start to zero knowledge in electrical doodiez..

but i manged to do a little search around, and tests  and my rs , alarm works fine.

thanks for the quick reply

leetless 
Member - Posts: 8
Member spacespace
Joined: September 15, 2006
Posted: October 21, 2006 at 1:09 AM / IP Logged  

is there any clifford coding on the book or anything like that

leetless 
Member - Posts: 8
Member spacespace
Joined: September 15, 2006
Posted: October 21, 2006 at 1:13 AM / IP Logged  

bhawkins wrote:
Install Guide:
http://www.directeddealers.com/manuals/ig/clifford/N919564_07-05.pdf
Owners Manual:
http://www.directeddealers.com/manuals/og/clifford/G919564_07-05.pdf
As for starting the car with the key your relay pack could have a stuck starter kill antigrind relay tap it a few times and see if that fixes it. If it doesnt you will prob have to replace it or remove the starter kill antigrind part. You should take it back to where you had it installed and have them look at it.

i dont understand the way tou side by taping a few times? can you explain a little more thanks

leetless 
Member - Posts: 8
Member spacespace
Joined: September 15, 2006
Posted: October 21, 2006 at 1:26 AM / IP Logged  

i wanted to know is there anything major to take out to install a possible a Remote start. clifford 3.5? to a evo 9 that is equip with factory keyless entry?

is clifford 3.5 capable bypassing itself? or do i have to do anything..

if so, i wanted to install a alarm on my car, and i really dont care about remote start, so wat will be my options?.. what did most of ya evo 9 owner do to your car.?  and i just feel unsave to have a 39k car w.o secuity.

bhawkins 
Member - Posts: 31
Member spacespace
Joined: March 15, 2003
Location: United States
Posted: October 21, 2006 at 1:26 AM / IP Logged  
I had the same problem with one of my other cars with the key not allowing you to start your car. So I asked here on this site and this is what they told me:
https://www.the12volt.com/installbay/forum_posts.asp?tid=84288&PN=1 https://www.the12volt.com/installbay/forum_posts.asp?tid=84288&PN=1
what do you mean by coding, the install guide tells you the steps in which to program the features of your alarm. This is done by using the remote, your ignition, and the vallet switch. I have an rsx 3.5 as well in my cars, the only programing I did was to learn the tach, and I changed how some of the outputs worked so I could use window modules.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 21, 2006 at 9:21 AM / IP Logged  
The Clifford system will be able to be installed into this vehicle without a problem. You have to grab all the trigger points that you want monitored by the Clifford alarm system. Hook up all the necessary ignition, acc & power/ground wires & then hook up the sensors that you have as well. The Eclipse isn't going to be hard for an alarm install but if you eventually want to add the RS portion, make sure that the Clifford is capable of installing into a manual vehicle before you go any further.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
leetless 
Member - Posts: 8
Member spacespace
Joined: September 15, 2006
Posted: October 21, 2006 at 6:02 PM / IP Logged  

i just finish installing my remote start 2 days ago, and while i was trying to clean up all the wires and stuff, i had to disconnet most of the wires to do the clean up

but now everything is plug back in my remote start is back to the previos problem. the remote start brain is not getting any signal

the previous problem i had was i was not getting a good 12v .. but now i check the 12v cord and it getting lots of voltage..   I had done a lot of button pressing from last time, and i mihgt have trigger something to make it work last time, and since i total d/c everything i might have forgot soemthing

one thing that my rs is not working is i cant start my car with they key, this happen even when i had my remote start working, i had to start up the car by remote 2 days ago, so how do i the tach learnin is it nesscary to do it?.. if i can fire up my car how can  i do the tach learning.. beside the tach learn is there anything else i need to do??

my alarm is working fine like before, i was just using my alarm for the last week w/o the remote untill i figure that the 12v was bad.. but i double check with a mulitmeter that i am getting voltage directly from the battery

thanks

leetless 
Member - Posts: 8
Member spacespace
Joined: September 15, 2006
Posted: October 21, 2006 at 6:07 PM / IP Logged  

just a litle bit more.. i know for the fact that it seems to me that no power is going to the relay or my remote is not giving signal to it.

i know that i need to hear the little click sound on the relay  if i press the rs start twice.. but i got nothing, it seems like i dont a 12v connects to it.. and i get the signal on my remote " the signal icon will be displayed if a command is transmited to the vehicle but a command page is not recieved"

Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer